Beam Double Side Door Frame Roll Forming Machine / Cold Roll Forming Equipment

Beam double side door frame cold rolling making machine, 1.2mm

Quick Detail:

1. Thickness : 0.8-1.2mm
2. Material : GI, 350Mpa
3. Strip width : 231mm
4. Material weight: 3MT
5. Driven way: by 7.5Kw driven motor
6. Cutting way: 4KW hydraulic pump
7. Cutting tolerance : ±1mm

Features:

There are normally two classic types of door frame, single side and double side as per different function of the door design

This double side door frame panel is very popular in Malaysia.

For a complete system, nowadays, many clients adopt to punch notch and holes together with the machine to improve the speed

So when the coil insert the sheets from the un-coiler to the roll former, there is the pre-leveling device and pre-notching and pre-punching device for three total door frame sheets, then go to the roll former and cut off

Machine list:

1. 3Tons*600mm hydraulic de-coiler
2. Roll forming machine
3. Hydraulic cutting device
4. Run out table
5. PLC control cabinet

Description/Technical Parameter details of complete line:

• 3TX600mm Hydraulic de-coiler

Hydraulic system for expansion coil-inner-hole with 4 palms

Link-connect expanding system

Pump power=1.5KW

Load capacity=3Ton

Coil Inner – diameter =510 30mm

Coiler Width=Max. 600 mm

• Roll forming machine with cutting details as below table :

• PLC Control System

Siemens brand PLC and touch screen, Schneider/ Shihlin/ Delta brand Inverter, Omron encoder

Cut-to-length tolerance≤±1mm

Control Voltage 24V

• Product Rack 4 meter length rolled type

Profile Drawing/Layout/Equipment reference pictures: